ATUM Technical Data
     
   
     
  High-Shrink-Ratio, Adhesive-Lined Polyolefin Tubing  
 
Applications: Environmentally seals and protects a wide variety of electrical applications, including back end connector sealing, breakouts, and connector-to-cable transitions. High expansion ratio makes it possible to repair most damaged cable jackets without removing connectors.
 
     
 
Installation: Minimum shrink temperature: 80°C [176°F]. Minimum full recovery temperature: 110°C [230°F].
 
     
 
Operating Temperature Range: -55°C to 110°C [-67°F to 230°F].
 
     
 
Specifications / Approvals
Series
UL**
Military Raychem
ATUM E85381
600V, 110°C		 AMS-DTL-23053/4,*
Class 3
 RW-2063 - Black
RK-6024 - Colors and Clear
*Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Sizes 3/1, 6/2, 12/4, 24/8, and 40/13 only.
**Black only, except sizes 3/1 and 4/1.
 
     
 
Product Dimensions
  Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded
as Supplied		 Maximum Recovered
After Heating		 Total Wall
After
Heating		 Adhesive Wall
After Heating
(Nominal)
3:1
3/1 3.0 [0.118] 1.0 [0.039] 1.00 ± 0.28 [0.039 ± 0.010] 0.50 [0.020]
4.5/1.5 4.5 [0.177] 1.5 [0.059] 1.10 ± 0.25 [0.043 ± 0.011] 0.50 [0.020]
6/2 6.0 [0.236] 2.0 [0.079] 1.00 ± 0.28 [0.039 ± 0.010] 0.50 [0.020]
9/3 9.0 [0.354] 3.0 [0.118] 1.40 ± 0.28 [0.055 ± 0.010] 0.61 [0.024]
12/4 12.0 [0.472] 4.0 [0.157] 1.78 ± 0.38 [0.070 ± 0.015] 0.76 [0.030]
19/6 19.0 [0.748] 6.0 [0.236] 2.25 ± 0.55 [0.088 ± 0.022] 0.76 [0.030]
24/8 24.0 [0.940] 8.0 [0.315] 2.54 ± 0.55 [0.100 ± 0.022] 1.02 [0.040]
40/13 40.0 [1.570] 13.0 [0.512] 2.54 ± 0.55 [0.100 ± 0.022] 1.02 [0.040]
4:1
4/1 4.0 [0.157] 1.0 [0.039] 1.00 ± 0.28 [0.039 ± 0.010] 0.50 [0.020]
8/2 8.0 [0.315] 2.0 [0.079] 1.00 ± 0.28 [0.039 ± 0.010] 0.50 [0.020]
12/3 12.0 [0.472] 3.0 [0.118] 1.40 ± 0.28 [0.055 ± 0.010] 0.61 [0.024]
16/4 16.0 [0.630] 4.0 [0.157] 1.78 ± 0.38 [0.070 ± 0.015] 0.76 [0.030]
24/6 24.0 [0.945] 6.0 [0.236] 2.25 ± 0.55 [0.088 ± 0.022] 0.76 [0.030]
32/8 32.0 [1.260] 8.0 [0.315] 2.54 ± 0.55 [0.100 ± 0.022] 1.02 [0.040]
52/13 52.0 [2.050] 13.0 [0.512] 2.54 ± 0.55 [0.100 ± 0.022] 1.02 [0.040]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
 
     
  NOTE: The information contained in this data sheet is based on information supplied by the manufacturer and is believed to be the most recent and reliable information available. BMRS WIRED is not responsible nor liable for the information and test results received by the manufacturer of these products.  
     

For More Information and Quotes:
Phone: 704.707.0122

Email: wired@bmrsusa.com