Polyimide Tape Techinal Information |
|
|
|
|
|
|
|
|
|
|
Available sizes: 1/4", 1/2", 3/4", 3/8", 1, 1-1/4", 1-1/2" and 2" |
|
|
|
|
|
Electrical grade Polyimide with pre-cured pressure sensitive silicone adhesive film is designed to operate at elevated temperatures higher than polyester. This heat-stabilized film surpasses the dimensional stability of polyester. |
|
|
|
|
|
|
Specifications |
Typical Values |
General |
|
Color |
Amber |
Material |
Polyimide |
Adhesive |
Silicon |
FIlm Thickness |
1 mil or 0.025 mm |
Total Thickness |
2.5 mil or 0.06 mm |
Length |
36 Yards or 33m |
Width |
19.68 Inch or 500 mm |
Physical Properties |
|
Adhesion to Steel |
1.3-1.5 lbs. / inch or 0.6-0.7 kg / 25mm |
Tensile Strength |
22-29 lbs. / inch or 10-13 kg / 25mm |
Elongation @ Break (%) |
>- 40% |
Electrical Resistance |
|
Voltage Resistance |
6 KV |
Surface Resistance |
>- 1.0* 10 to the 13th |
Dielectric Modulus |
>- 3-4 10 to the 6th Hz |
Medium Loss Factor |
>- 1.0* 10-3 10 to the 6 Hz |
Temperature Resistance |
|
Temperature |
500°F - 260°C |
Resistance to: Acids, Oils, Solvents |
Excellent |
|
|
|
|
|
|
NOTE: The information contained in this data sheet is based on information supplied by the manufacturer and is believed to be the most recent and reliable information available. BMRS WIRED is not responsible nor liable for the information and test results received by the manufacturer of these products. |
|
|
|
|
For More Information and Quotes: |
Phone: 704.707.0122 |
Email: wired@bmrsusa.com |
|