Deutsch I.P.D. Technical Data
     
   
     
  General Specifications  
 

Insulation Resistance: 1000 megohms minimum at 250°C.
 
     
 
Submersion: Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage.
 
     
 
Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications.
 
     
 
Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.
 
     
 
Temperature: Operative at temperatures from -55°C to +125°C. Continuous at rated current.
 
     
 
Contact Retention: Contacts withstand a minimum load of:
20 lbs. (89N) for size 20
25 lbs. (111N) for size 16
30 lbs. (133N) for size 12
35 lbs. (156N) for size 8
35 lbs. (156N) for size 4
 
     
 
Features Benefits
Integral Connector Latch Tactile and Audible Assembly Feedback
Rugged Thermoplastic Housing Field Proven Long Service Life
-55°C to +125°C Operating Temperature Engine Compartment Rated
Available Configurations:
DTM/DT 2, 3, 4, 6, 8 & 12 - Size 20/16
DTP 2 & 4 - Size 12
DTHD 1 - Size 4, 8 & 12		 Meets Most Harness Design Requirements
Silicone Seals: Superior Environmental Seal
DTM: Accepts AWG 22 - 18 wire
DT: Accepts AWG 20 - 14 wire
DTP: Accepts AWG 14 - 10 wire
DTHD: Accepts AWG 14 - 6 wire		 Seals on .053” to .120 dia.(1.35mm to 3.05mm)
Seals on .053” to .145 dia.(1.35mm to 3.68 mm)
Seals on .097” to .170 dia.(2.46mm to 4.32mm)
Seals on .134 to .292 dia. (3.40mm to 7.42mm)
Crimp Contacts with Option of Gold or Nickel
Finish, Solid or Stamped Construction		 Low Costs, High Reliability Terminals for Data &
Signal Transmission
Current Rating All Contacts @ 125°C No Derating
DTM - 7.5 Amps
DT - 13 Amps
DTP - 25 Amps
DTHD - 25 to 100 Amps		 Meets Most Signal Requirements
Fail-Safe Secondary Locks All (Except DTHD) Positive Contact Retention
Hand Insertable/Removable Contacts No Special Tools Required (Except DTHD)
Budget Minded Low Installation Costs
 
     
  NOTE: The information contained in this data sheet is based on information supplied by the manufacturer and is believed to be the most recent and reliable information available. BMRS WIRED is not responsible nor liable for the information and test results received by the manufacturer of these products.  
     

For More Information and Quotes:
Phone: 704.707.0122

Email: wired@bmrsusa.com